To make a film camera easier to use, Kodak often changed what went inside it. The first Kodak took loading out of the owner’s hands. Later cameras let the owner reload in daylight, and eventually a cartridge could drop…
Items5The creator’s order
- 1
Original Kodak CameraWith the 1888 Kodak, the box arrived ready for 100 pictures. When you reached the end of the roll, you could send the whole camera back to Rochester for developing, printing, and a reload. You got to skip handling the film, but you had to wait for the camera to come back.0
- 2
Pocket Kodak (1895)You could put a fresh roll in the little 1895 Pocket Kodak in daylight. That meant keeping the camera with you instead of sending it away for another roll. The trade-off was capacity. A roll for this model held 12 exposures, so you would change it more often.0
- 3
Kodak Retina Type 117The 1934 Retina put 35 mm film in a preloaded 135 cartridge you could change in daylight. The cassette took care of carrying and protecting the film, so you could skip packing bulk film into a holder. You still had to pull out and attach the film leader to the camera’s take-up spool.0
- 4
Kodak InstamaticKodak Instamatic 100 With the 1963 Instamatic 100, you dropped the 126 cartridge into the back. There was no loose leader to thread. The model also had a pop-up flash that took individual bulbs, so adding flash was still a separate step.0
- 5
Kodak Pocket Instamatic 20The 1972 Pocket Instamatic 20 kept the drop-in idea but moved to the smaller 110 cartridge. The camera was only about an inch thick, so you could carry it without much planning. The smaller film left less negative area for making big prints.0