Copyright © 2026 OyList. All Rights Reserved.
Share
Items7
1
Dual-Surface Rubber Stall Mat
Use a heavy rubber stall mat when you want to protect one busy patch of concrete without buying flooring for the whole garage. This mat measures 4 by 6 feet and is 3/4 inch thick. Its size makes it handy under stationary equipment. Check how it will fit around doors and plan how you’ll move it before buying several.
More about Dual-Surface Rubber Stall Mat2
Rogue Deadlift Platform
Give deadlifts a designated spot if loaded plates keep landing on the same slab. Rogue’s steel frame holds the lifting surface in one area. The base frame comes without rubber tiles, and the optional wood inserts go below the lifting surface. Mark out the footprint first so you can still load the bar and move around it.
More about Rogue Deadlift Platform3
FlooringInc 3/8-Inch Heavy Duty Rubber Rolls
Use rolls when you want to cover a wider training bay with fewer seams than small tiles. FlooringInc’s 3/8-inch Heavy Duty rolls are four feet wide. Measure around any steps, posts, and door tracks, and plan where the roll edges will meet. Keep a separate landing area if most of the impact falls in one part of the room.
More about FlooringInc 3/8-Inch Heavy Duty Rubber Rolls4
American Floor Mats Fit-Lock Rubber Tiles
Consider interlocking tiles for an awkward footprint or a workout area you want to enlarge over time. Fit-Lock offers corner, border, and center pieces. Those options help you get a finished edge without cutting every outer tile. Count each piece type before ordering so you can make the shape you need.
More about American Floor Mats Fit-Lock Rubber Tiles5
Rogue V2 Gun Rack Barbell Holder
Store bars horizontally if you have a clear stretch of wall and want to keep them out of the walk path. Rogue’s V2 can hold up to six barbells. Check the full length of your longest bar, including what will stick out past the rack, and use the manufacturer’s installation directions and the mounting hardware your wall requires.
More about Rogue V2 Gun Rack Barbell Holder6
Titan Wall-Mounted 4-Peg Olympic Bumper Plate Weight Rack
Try this when loose Olympic plates keep collecting around the platform. The four pegs let you keep sizes apart without returning everything to one stack. Titan rates the rack at up to 200 pounds per peg and specifies anchoring to both wall and floor. Check the installation requirements and whether you can still slide plates on and off in your space.
More about Titan Wall-Mounted 4-Peg Olympic Bumper Plate Weight Rack7
Rogue Belt & Band Hanger
Keep lighter accessories where they are easy to grab and put away. This wall hanger gets lifting belts and looped bands off the floor without using a larger shelf. Rogue does not include mounting hardware, so check the mounting pattern and your wall before choosing it.
More about Rogue Belt & Band Hanger